The rubber adhesive based VELCRO® Brand hook and loop fastener is a pressure sensitive adhesive system, the PS14 rubber solution is applied to the back of the hook and loop tape, it bonds on contact and cures to its optimum strength in 24 hours to form a permanent fix on suitable substrates.
This is genuine VELCRO® Brand PS14 Hook and Loop Tape.
VELCRO® and ONE-WRAP® are registered trademarks of Velcro BVBA. Used with permissions
VELCRO® Brand fasteners with general purpose adhesive are recommended for smooth surfaces and for indoor or outdoor use. Application Instructions:
- Clean and dry surface before application
2. Peel tape from fastener and press firmly into place
3. Adhesive reaches maximum strength after 24 hours
Note: Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage the fastener. Pointed corners on VELCRO® brand Hook and Loop tapes are sometimes detrimental to a good bond. We recommend nipping or rounding each corner of the VELCRO® brand tape to eliminate this vulnerable area.