VELCRO® Brand Self Adhesive Tape, Hook and loop Sticky Fastener

Description:

GENUINE VELCRO® BRAND PS14 STICK-ON HOOK & LOOP

The rubber adhesive based VELCRO® brand hook and loop fastener is a pressure sensitive adhesive system, the PS14 rubber solution is applied to the back of the hook and loop tape, it bonds on contact and cures to its optimum strength in 24 hours to form a permanent fix on suitable substrates.

PS14 should be used at room temperature and is suitable for interior use only, the resin is perfectly suited to low energy substrates, and can be used confidently on the following surfaces; Anodised Aluminium, Glass, Painted Wallboard, Plywood, Polyester, Stainless Steel, Formica (Polished side only) and Polyacrylic, with reservation VELCRO® brand PS14 adhesive, can be used on; Polyethylene, Polypropylene, Cardboard and some Fabrics, however, bond strength is limited, the adhesive is not suitable for Vinyl. 

• Strong PS14 rubber adhesive resin you can rely on.
• Simply peel off the backing paper and apply.
• Available in Black or White.
• Available in a choice of widths.
• Available in a choice of lengths.

This is genuine VELCRO® Brand PS14 Hook and Loop Tape. 

VELCRO®  and ONE-WRAP® are registered trademarks of Velcro BVBA. Used with permissions

SUBSTRATES

PS-14 ADHESIVE

ALUMINIUM ANODISED

+

GLASS

+

PAINTED WALLBOARD

+

PLYWOOD

+

POLYESTER

+

POLYETHYLENE

=

POLYPROPYLENE

=

STAINLESS STEEL

+

FORMICA (POLISHED SIDE)

+

CARDBOARD

=

POLYACRYLIC

+

FABRICS

=

VINYL

-

PLASTICS (INC. PVC)

-

 

+

 SUITABLE

=

 WITH RESERVATION

-

 NOT SUITABLE

 

VELCRO® Brand fasteners with general purpose adhesive are recommended for smooth surfaces and for indoor or outdoor use. Application Instructions:

  1. Clean and dry surface before application
    2. Peel tape from fastener and press firmly into place
    3. Adhesive reaches maximum strength after 24 hours

Note: Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage the fastener. Pointed corners on VELCRO® brand Hook and Loop tapes are sometimes detrimental to a good bond. We recommend nipping or rounding each corner of the VELCRO® brand tape to eliminate this vulnerable area.